Cisco Catalyst 2960 Plus 48 10/100 + 2 T/SFP LAN Base(WS-C2960+48TC-L)

Cisco Catalyst 2960-Plus 48 Ports LAN Base Switches, supporting 48 x 10/100 ports, are designed for branches, conventional office workspaces, and infrastructure

Features    

  • Full duplex capability
  • BOOTP support
  • ARP support
  • VLAN support
  • Syslog support
  • DiffServ support
  • IPv6 support
  • Spanning Tree Protocol (STP) support
  • Rapid Spanning Tree Protocol (RSTP) support
  • Multiple Spanning Tree Protocol (MSTP) support
  • DHCP snooping
  • Port Aggregation Protocol (PAgP) support
  • Trivial File Transfer Protocol (TFTP) support
  • Quality of Service (QoS)
  • Dynamic ARP Inspection (DAI)
  • Cisco EnergyWise technology
  • Shaped Round Robin (SRR)
  • LLDP support
  • DHCP relay
  • Link Aggregation Control Protocol (LACP)
  • MAC Address Notification
  • Management Information Base (MIB)
  • Class of Service (CoS)
  • DiffServ Code Point (DSCP) support

General

Authentication Method RADIUS, TACACS+
Capacity Active VLANs: 255
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP)
Device Type Switch - 48 ports - Managed
Enclosure Type Rack-mountable 1U
Flash Memory 64 MB
Jumbo Frame Support 9018 bytes
Performance Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 10.1 Mpps
Ports 48 x 10/100 + 2 x combo Gigabit SFP
RAM 128 MB
Remote Management Protocol SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI
Status Indicators Port status, link activity, port transmission speed, port duplex mode, power, system
Subtype Fast Ethernet

Dimensions & Weight

Depth 24.2 cm
Height 4.4 cm
Weight 3.6 kg
Width 45 cm

Environmental Parameters

Humidity Range Operating 10 - 95% (non-condensing)
Humidity Range Storage 10 - 95% (non-condensing)
Max Operating Temperature 40 °C
Max Storage Temperature 70 °C
Min Operating Temperature -5 °C
Min Storage Temperature -25 °C

Expansion / Connectivity

Interfaces 48 x 100Base-TX - RJ-45 ¦ 2 x - SFP - uplink ¦ 2 x 1000Base-T - RJ-45 - uplink

Manufacturer Warranty

Service & Support Limited warranty - advance parts replacement - lifetime - response time: next business day ¦ Technical support - consulting - 90 days

Miscellaneous

Compliant Standards CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1 Second Edition, Directive 2004/108/EC, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, VCCI Class A, KN24, KN22 Class A, EN 300386, RoHS 2011/65/EU
MTBF 623,000 hours

Power

Features Redundant Power System (RPS) connector
Power Consumption Operational 30.6 Watt
Power Device Internal power supply
Voltage Required AC 120/230 V (50/60 Hz)

Software / System Requirements

Software Included Cisco LAN Base software

///* */